Sunday, March 9, 2014

Fender Stratocaster pickup height adjustment and specifications




Today we’re going to have a very quick look at pickup setup for a Fender Stratocaster-style guitar. Adjusting the pickups on a Strat couldn’t be much easier and the only thing that really requires much consideration is what height to set them at. You’ll need two tools for this: a Phillips screwdriver and a ruler (ideally one that measures right to the end).

Before measuring any pickup heights, press down on the low E string at the highest fret.
 


With your finger still pressing down on the string, measure the distance from the bottom of the E string to the top of the pole piece (pickup magnet) directly under that string.



Fender recommends the following distances from the thick E string to the pole pieces for all three pickups, depending on the type of pickup you have:
  • Texas Specials: 8/64" (3.2 mm)
  • Vintage style: 6/64" (2.4 mm)
  • Noiseless™ Series: 8/64" (3.2 mm)
  • Standard Single-Coil: 5/64" (2 mm)
  • Humbuckers: 4/64" (1.6 mm)
If you need to adjust any of the pickup heights, then to raise the pickup (thus reducing the distance from the pickup to the string), turn the screwdriver clockwise. Similarly, to lower the pickup, turn it anti-clockwise (counterclockwise).



Now repeat for the thin E string, remembering to press down on it at the highest fret before measuring. 

 
Note that pickup height specifications for this string (again, for all three pickups) are different from the thick E string, as follows:
  • Texas Specials: 6/64" (2.4 mm)
  • Vintage style: 5/64" (2 mm)
  • Noiseless™ Series: 6/64" (2.4 mm)
  • Standard Single-Coil: 4/64" (1.6 mm)
  • Humbuckers: 4/64" (1.6 mm) 


And we're done. Remember that these specifications are merely guidelines, and you should
feel free to adjust slightly to your own tastes. However, note that adjusting the pickups so that they are too close to the strings can be problematic, as the magnetic fields produced by the pickup start to pull on the strings.


12 comments:

Anonymous said...

What is a good pickup hight for a Strat with EMG DG 20 pickups? Thanks!

JAM said...

Thanks for this. Essential info for several pickup heights in one spot. I have the worst time trying to remember Fender recommendations for setting their pickup heights.

Anonymous said...

All your posts on setting up strat tremolo, electric guitar set ups, and pickup height settings is the best info available. Your posts are like a breath of fresh air. I thank you. From OZ

stu said...

Thank you.

Jeremiah Bates said...

I just bought a Squier Strat the other day, I realize it's the "bottom of the barrel" but, I'd like to set it up, I've been reading the posts you've put up, here's the question: my guitar has pickups with pole pieces all different heights, almost as if the pole pieces are following the string radius, is this something special to this guitar, is it something that is wrong, or ... what?

stu said...

Hey Jeremiah, that's a GREAT question and I'm surprised no-one has asked it before. It sounds like you have staggered pickups, which are adjusted in an effort to better balance each string's output ( whether or not this is better is debatable--see here: http://menga.net/understanding-flat-and-staggered-pole-pieces-in-pickups ). There's certainly nothing wrong with what you've got. Oh, and nothing wrong with Squiers!

Jeremiah Bates said...

thank you Stu, for the information you provided, it does help, now on to find a tuner, and get my guitar set up

Brian Mathers said...

Great article and very clear, I try to always read your set ups. Thanks Brian

Buxton56 said...

Thank you so much for all your advice and help! I'm 60 and always wanted to learn to play electric guitar and I am totally new to all this guitar stuff. My son gave me a Fender Bullet Strat for Christmas and I love it but it seemed a little big for me ( I'm only 4'11 with small hands). So I found the Squire Mini and it is perfect! The only thing that I don't like about it is that it does not have a tremolo bar. Can one be put on the Mini? I am very good at DIY and I'm hoping I can do a little modding to my Mini.

Unknown said...

I have 5,0mm on the low E and 3mm on the high E (Single coils). And on my humbucker (Seymour Duncan SH4) 4mm on high and low E.

Anonymous said...

OK here is the deal with me I see the plows are fairly flat in the stray you are adjusting. They are close to the new pickups I just installed. They are not near as staggered as the previous set I had in ... So is there a difference in height adjustment?

Unknown said...

Great blog. You jave a lot if knowledgeable people responding. Awsome. My question is, are pick ups on a squire with the staggared poles udjusted to the same height as the strat?..../thanks guys